Acton紫外——VUV/UV激光分束镜

基本信息

Acton紫外——VUV/UV激光分束镜

Acton Optics & Coatings可以根据水平“P”偏振或垂直“S”偏振等要求进行优化,为您的应用定制分光器。如果需要,可在分束器的背面涂上抗反射涂层。可在阿克顿的标准基材上使用涂料。

这些多层,介质,低吸收涂层是理想的激光输出耦合器和束分裂应用。所有波长范围为126至353 nm的分束器,均按指定的激光波长和入射角校正反射率和透过率,以确保在高功率激光应用中具有优异的性能。标准分束器是为随机极化设计的。

Wavelength 10% +/-2% 30% +/-5% 50% +/-5% 70% +/-5% 90% +/-5%
126nm M126-P1045 M126-P3045 M126-P5045 M126-P7045 M126-P9045
147nm M147-P1045 M147-P3045 M147-P5045 M147-P7045 M147-P9045
157nm M157-P1045 M157-P3045 M157-P5045 M157-P7045 M57-P9045
172nm M172-P1045 M172-P3045 M172-P5045 M172-P7045 M172-P9045
193nm M193-P1045 M193-P3045 M193-P5045 M193-P7045 M93-P9045
248nm M248-P1045 M248-P3045 M248-P5045 M248-P7045 M248-P9045
266nm M266-P1045 M266-P3045 M266-P5045 M266-P7045 M266-P9045
308nm M308-P1045 M308-P3045 M308-P5045 M308-P7045 M308-P9045
353nm M353-P1045 M353-P3045 M353-P5045 M353-P7045 M353-P9045

NOTE:??Beamsplitter Coating Part Numbers (Based on % Transmission)

For Complete Beamsplitter:
Coating Part # + Substrate Part # =
Complete BeamsplitterFor example:?
To order a 308nm, 45° beamsplitter with 30% transmittance on a 1.0” flat UV grade fused silica substrate:
Part # M308-P3045-1D-MBCoatings for rear surface use must be specified by adding ‘-S2’ to coating part numbers.
Part numbers listed above are for 45° angle of incidence coating only. If normal incidence coatings are required, delete the ‘45’ from the coating part number.

Ex: Part # M193-P1045 would be Part # M193-P10.

Generally, laser grade UV fused silica substrates are recommended for beamsplitters above 170nm.

Beamsplitter coatings can be applied to customer supplied material.

光谱曲线

注意:可根据要求定制

193 nm UV beamsplitter

Text Widget
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vivamus quis neque vel quam fringilla feugiat. Suspendisse potenti. Proin eget ex nibh. Nullam convallis tristique pellentesque.
XML 地图 | Sitemap 地图

威尼斯登录中心